sealing products
 

Pipes and Pipe Fittings

    


Sealing Technologies Inc represents chosen Industrial leaders , ISO-certified , high quality North American , Korean and Chinese producers for a full range of socket and spigot pipes, fittings and pipework per ISO/EN/BS standards ranging from DN 80 up to and including DN 2600, the largest range available on the world market. We have a wide range of international references supplying to projects for North American , Middle East and Far Eastern contractors. Our factories total capacity is quite large which allows us to cater to our clients with high quality products with zero defects in reasonably short turn around times.

Steel Pipes and Fittings

           

 
Sealing Technologies is one of the leading distributors and suppliers specializing in steel pipe products in Toronto, Canada , mainly offering four series steel pipes including welded steel pipe (ERW, SSAW, LSAW and square and rectangle pipe), seamless steel pipe, hot dipped galvanized steel pipe and steel pipe with 3 layer polythene coating.

Standards and Range  

We can offer as per standards such as ASTM A53, ASTM A106, BS1387, API 5L, API 5CT, ISO3183 etc. We can supply welded pipes with outside diameter from 1/2" to 48" and 1/8" to 20" for the seamless pipes. For square and rectangle pipes , we can supply sizes ranging from 10*10mm to 400*400mm and 10*20mm to 300*500mm.

All pipes that we are dealing with are manufactured by our Associate Partner's manufacturing plants who are ISO Certified and have highest reputation in the industry . By establishing a solid strategic long term tie-up with our partners , we are integrating resources and optimizing efficiency.

Other than steel pipes we are also capable of supplying a wide variety of pipeline accessories, steel pipe fittings; valves etc , which makes us an ultimate resource for complete pipes and fittings that are rrequired by the Industry.

 

Ductile Iron Pipes and Fittings

Sealing Technologies Ductile Iron Castings Division is a leading supplier and distributor of high quality ductile iron pipe, pipe fittings and manhole covers in Toronto, Canada.

We offer Ductile Cast Iron Pipes, Fittings , Flanges and Valves for Water, Waste Water and Sewage applications.

Ductile iron pipe is generally acknowledged as the best choice for conveying portable/sewage water under pressure. It has many fine features in terms of wall thickness, tensile strength, elongation, anti-corrosion, service life, installation and so on comparing with traditional pipeline products. Zinc coating and bitumen painting are being used successfully to prevent the corrosion of water mains.

 

Standards and Range


Our Range is  DN80~DN2200mm, K7/K8/K9/K10/K12, Tyton joint, Mechanical joint, Flanged joint, Self-restrained joint ductile cast iron pipe and fittings.


We offer Ductile Iron Pipes, fittings , accessories and their Joints as per ISO2531: 1998 , EN545: 2002 ( for Water pipe lines ) and EN598: 1994 ( for Sewerage applications ) ; We offer Ductile Iron Pipes with External Zinc coating - Part I ( Metallic zinc with finishing layer ) as per ISO 8179-1:1995 , Centrifugal Cement Mortor Lining as per ISO 4179:1985 ( for pressure and Non-pressure pipe lines ) and Polyethylene Sleeving as per ISO 8180:1985 .


Manufacturing Facilities with whom we are tied up for the supply of these Pipes and fittings have Quality Management System Certification. Stringent measures of quality control are applied through all the process of manufacturing, from raw materials to finished products.


Sealing Technologies offer Pipe accessories such as gasket, bolts, nuts, washers, caps, lubricant and related products such as manhole covers, valves, pumps and water meters , thus it is a single source solution for complete industry requirements.

 


 

 

 

 

 

 

 

 

Site Designed by
Maainfosys
Home | Products | About Us | Services | Industries Served | Technical Info | Media Center | Contact Us | Sitemap | Rss feed
Copyright © 2010. sealingtechnologies.com All rights reserved.